Simulation Methods in Physics II SS 2016
Exam dates: Mo 19.9.2016 between 10am14pm and Wed 12.10.2016 between 10am12pm and 1415pm. Please, send an email to Christian Holm with your preferred date and time. 
Overview
 Type
 Lecture (2 SWS) and Tutorials "Simulationsmethoden in der Praxis" (2 SWS)
 Lecturer
 Prof. Dr. Christian Holm, JP Dr. Maria Fyta
 Course language
 English
 Location and Time
 Lecture: Thu, 11:30  13:00; ICP, Allmandring 3>, Seminar Room (room 01.079)
 Tutorials: Thu, 14:00  15:30 (Tutors: Dr. Frank Uhlig, Johannes Zeman; ICP, Allmandring 3, CIPPool (room 01.033)
The tutorials have their own title "Simulationsmethoden in der Praxis", as they can be attended independently of the lecture and are in fact part part of the Physics MSc module "Fortgeschrittene Simulationsmethoden" and not of the module containing the lecture "Simulation Methods in Physics II".
These handsontutorials will take place in the CIPPool of the ICP, Allmandring 3. They consist of practical exercises at the computer, like small programming tasks, simulations, visualization and data analysis. The tutorials build on each other, therefore continuous attendance is expected.
Scope
The course intends to give an overview about modern simulation methods used in physics today. The stress of the lecture will be to introduce different approaches to simulate a problem, hence we will not go too to deep into specific details but rather try to cover a broad range of methods. For an idea about the content look at the lecture schedule.
Prerequisites
We expect the participants to have basic knowledge in classical and statistical mechanics, thermodynamics, electrodynamics, and partial differential equations, as well as knowledge of a programming language. The knowledge of the previous course Simulation Methods I is expected.
Certificate Requirements
 1. Attendance of the exercise classes
 2. Obtaining 50% of the possible marks in each worksheet
The final grade will be determined from the final oral examination.
Oral Examination
Please email to Christian Holm or Maria Fyta in order to arrange a date in September or october for the oral examination.
Recommended literature

Daan Frenkel, Berend Smit.
Understanding Molecular Simulation: From Algorithms to Applications.
Part of Computational Science, volume 1. Edition 2.
Academic Press, San Diego, 2002. ISBN: 9780122673511.
[DOI] 
Mike P. Allen, Dominik J. Tildesley.
Computer Simulation of Liquids.
Part of Oxford Science Publications. Edition 1.
Clarendon Press, Oxford, 1987.

D. C. Rapaport.
The Art of Molecular Dynamics Simulation.
Edition 2.
Cambridge University Press, 2004. ISBN: 9780511816581.
[DOI] 
D. P. Landau, K. Binder.
A guide to Monte Carlo Simulations in Statistical Physics.
Edition second edition.
Cambridge, 2005.

Michael Rubinstein, Ralph H. Colby.
Polymer Physics.
Oxford University Press, Oxford, UK, 2003.

M. E. J. Newman, G. T. Barkema.
Monte Carlo Methods in Statistical Physics.
Edition 2002 edition.
Oxford University Press, 1999.

Sauro Succi.
The lattice Boltzmann equation for fluid dynamics and beyond.
Oxford University Press, New York, USA, 2001. ISBN: 9780198503989.
[PDF] (13 MB) 
M. E. Tuckermann.
Statistical Mechanics: Theory and Molecular Simulation.
Oxfor University Press Oxford Graduate Texts, Oxford, 2010.

F. Martin, H. Zipse.
Charge Distribution in the Water Molecule  A Comparison of Methods.
Journal of Computational Chemistry 26(1):97–105, 2004.

E. Kaxiras.
Atomic and electronic structure of solids.
apud Cambridge, Cambridge, 2003.

Andrew Leach.
Molecular Modelling: Principles and Applications.
apud Pearson Education Ltd., 2001. ISBN: 9780582382107.
Useful online resources
 Roethlisberger, Tavernarelli, EPFL, Lausanne, 2011: Introduction to electronic structure methods.
 EBook: Kieron Burke et al.,University of California, 2007: EBook: The ABC of DFT.
 Linux cheat sheet here (53 KB).
 A good and freely available book about using Linux: Introduction to Linux by M. Garrels
 Be careful when using Wikipedia as a resource. It may contain a lot of useful information, but also a lot of nonsense, because anyone can write it.
Lecture
Date  Subject  Resources 

07.04.2016  Introduction, Ab initio methods, Quantum mechanics, HartreeFock  Lecture Notes (2.7 MB) Lecture Notes (3.11 MB) 
14.04.2016  Density functional theory, CarParrinello MD  Lecture Notes (2.99 MB) 
21.04.2016  ab initio MD, post HartreeFock methods  Lecture Notes (5.59 MB) 
28.04.2016  Classical force fields, Atomistic simulations, Biomolecules, Water models  Lecture Notes (1.37 MB) Lecture Notes (3.81 MB) 
05.05.2016  Holiday (Christi Himmelfahrt)  
12.05.2016  Coarsegrained models, simulations of macromolecules and soft matter  Lecture Notes (4.25 MB) 
19.05.2016  Holiday (Pfingsten)  
26.05.2016  Holiday (Fronleichnam)  
02.06.2016  PoissonBoltzmann theory, charged polymers  Slides (6.94 MB) 
09.06.2016  PoissonBoltzmann theory, charged polymers cont.  Lecture Notes (171 kB) 
16.06.2016  Long range interactions in periodic boundary conditions  Lecture Notes (4.01 MB) 
23.06.2016  Hydrodynamic methods I Stokesian and Brownian Dynamics  Lecture Notes (2 MB) Lecture Notes (3.84 MB) 
30.06.2016  Hydrodynamic methods II LatticeBoltzmann, DPD, MPCD  Lecture Notes (2.63 MB) 
07.07.2016  Free energy methods  Lecture Notes (6.13 MB) 
14.07.2016  Advanced MC/MD methods  Lecture Notes (3.17 MB) 
Tutorials
Location and Time
 The tutorials take place in the CIPPool on the first floor of the ICP (Room 01.033, Allmandring 3), time Thu 14:0015:30 (Tutors: Frank Uhlig / Johannes Zeman )
General Remarks
 For the tutorials, you will get a personal account for the ICP machines.
 All material required for the tutorials can also be found on the ICP computers in the directory
/group/sm/2016
.  For the reports, we have a nice LaTeX template (7 KB).
 You can do the exercises in the CIPPool when it is not occupied by another course. The pool is accessible on all days, except weekends and late evenings.
 If you do the exercises in the CIPPool, all required software and tools are available.
Handinexercises
 The worksheets are to be solved in groups of two or three people. We will not accept handinexercises that only have a single name on it.
 A written report (between 5 and 10 pages) has to be handed in for each worksheet. We recommend using LaTeX to prepare the report.
 You have two weeks to prepare the report for each worksheet.
 The report has to be sent to your tutor via email (Frank Uhlig or Johannes Zeman).
 Each task within the tutorial is assigned a given number of points. Each student should have 50 % of the points from each tutorial as a prerequisite for the oral examination.
What happens in a tutorial
 The tutorials take place every week.
 You will receive the new worksheet on the days before the tutorial.
 In the first tutorial after you received a worksheet, the solutions of the previous worksheet will be presented (see below) and the new worksheet will be discussed.
 In the second tutorial after you received the worksheet, there is time to work on the exercises and to ask questions for the tutor.
 You will have to hand in the reports on Monday after the second tutorial.
 In the third tutorial after you received the worksheet, the solutions will be discussed:
 The tutor will ask a team to present their solution.
 The tutor will choose one of the members of the team to present each task.
 This means that each team member should be able to present any task.
 At the end of the term, everybody should have presented at least once.