Simulation Methods in Physics II SS 2023
![]() |
Please register for this course on CAMPUS, so that every student can get access to ILIAS. The course will be administered through ILIAS. |
Overview
- Type
- Lecture (2 SWS) and Tutorials "Simulationsmethoden in der Praxis" (2 SWS)
- Lecturers
- Prof. Dr. Christian Holm
- Tutorials
- The tutorials have their own title "Simulationsmethoden in der Praxis", as they can be attended independently of the lecture and are in fact part part of the Physics MSc module "Fortgeschrittene Simulationsmethoden" and not of the module containing the lecture "Simulation Methods in Physics II".
- Tutors
- Samuel Tovey and Mariano Brito
- Location and Time
- Lecture: Lectures are held in the ICP seminar room.
- Tutorials: Wednesday 15:45-17:15 and Thursday 15:45-17:15
- Course language
- English
Scope
The course intends to give an overview about modern simulation methods used in physics today. The stress of the lecture will be to introduce different approaches to simulate a problem, hence we will not go too to deep into specific details but rather try to cover a broad range of methods. For an idea about the content, look at the lecture schedule.
Prerequisites
We expect the participants to have basic knowledge in classical and statistical mechanics, thermodynamics, electrodynamics, and partial differential equations, as well as knowledge of a programming language. The knowledge of the previous course (Simulation Methods I) is expected.
Certificate Requirements
- 1. Obtaining 50% of the possible marks in each of the hand-in exercises.
The final grade will be determined from the final oral examination.
Oral Examination
Please email Christian Holm in order to arrange a date for the oral examination.
There is an oral examination at the end of the semester. All students having obtained 50% of the points from each tutorial are eligible to take the exam. The duration of the exam depends on the module this lecture is part of. Briefly,
- BSc/MSc Physik, Modul "Simulationsmethoden in der Physik"
- 60 min exam (contents from both parts SMI + SMII will be examined)
- International MSc Physics, Elective Module "Simulation Techniques in Physics II" (240918-005)
- 30 min exam (content only from SMII will be examined).
- BSc/MSc SimTech, Modul "Simulationsmethoden in der Physik für SimTech II"
- 40 min (content from SMII will be examined).
For additional information/modules, please contact Christian Holm.
Recommended Literature
-
Daan Frenkel, Berend Smit.
Understanding Molecular Simulation: From Algorithms to Applications.
Part of Computational Science, volume 1. Edition 2.
Academic Press, San Diego, 2002. ISBN: 978-0-12-267351-1.
[DOI] -
Mike P. Allen, Dominik J. Tildesley.
Computer Simulation of Liquids.
Part of Oxford Science Publications. Edition 1.
Clarendon Press, Oxford, 1987.
-
D. C. Rapaport.
The Art of Molecular Dynamics Simulation.
Edition 2.
Cambridge University Press, 2004. ISBN: 9780511816581.
[DOI] -
D. P. Landau, K. Binder.
A guide to Monte Carlo Simulations in Statistical Physics.
Edition second edition.
Cambridge, 2005.
-
Michael Rubinstein, Ralph H. Colby.
Polymer Physics.
Oxford University Press, Oxford, UK, 2003.
-
M. E. J. Newman, G. T. Barkema.
Monte Carlo Methods in Statistical Physics.
Edition 2002 edition.
Oxford University Press, 1999.
-
Timm Krüger, Halim Kusumaatmaja, Alexandr Kuzmin, Orest Shardt, Goncalo Silva, Erlend Magnus Viggen.
The Lattice Boltzmann Method: Principles and Practice.
Springer International Publishing, Cham, 2017. ISBN: 9783319446479.
[PDF] (14 MB) [DOI] -
Sauro Succi.
The lattice Boltzmann equation for fluid dynamics and beyond.
Oxford University Press, New York, USA, 2001. ISBN: 9780198503989.
[PDF] (13 MB) -
M. E. Tuckermann.
Statistical Mechanics: Theory and Molecular Simulation.
Oxfor University Press Oxford Graduate Texts, Oxford, 2010.
-
F. Martin, H. Zipse.
Charge Distribution in the Water Molecule - A Comparison of Methods.
Journal of Computational Chemistry 26(1):97–105, 2004.
-
E. Kaxiras.
Atomic and electronic structure of solids.
apud Cambridge, Cambridge, 2003.
-
Andrew Leach.
Molecular Modelling: Principles and Applications.
apud Pearson Education Ltd., 2001. ISBN: 978-0582382107.
-
Attila Szabo, Neil S. Ostlund.
Modern Quantum Chemistry: Introduction to Advanced Electronic Structure Theory.
Edition 1.
Dover Publications, 2014. ISBN: 978-0-486-69186-2.
Useful Online Resources
- Roethlisberger, Tavernelli, EPFL, Lausanne, 2015: [1]
- E-Book: Kieron Burke et al.,University of California, 2007: E-Book: The ABC of DFT.
- Linux cheat sheet
here (53 KB)
.
- A good and freely available book about using Linux: Introduction to Linux by M. Garrels
- Density-functional-theory tight-binding (DFTB): Phil. Trans. R. Soc. A, 372(2011), 20120483. [2], Computational Materials Science 47 (2009) 237–253 [3]
- "Ab Initio Molecular Dynamics: Theory and Implementation" in Modern Methods and Algorithms, NIC Series Vol 1. (2000) [4]
- University Intranet: Quantentheorie der Molekuele (DE), Springer Spektrum 2015, [5]
- Be careful when using Wikipedia as a resource. It may contain a lot of useful information, but also a lot of nonsense, because anyone can write it.
Lectures Timetable
The lecture notes will be uploaded in due time after each lecture on the ILIAS course.
Date | Subject | Resources |
---|---|---|
13.04.2023 | Quantum-mechanical Methods I - Hartree/Hartree-Fock/post Hartree-Fock | |
20.04.2023 | Quantum-mechanical Methods II - Density Functional Theory/ab-initio MD | |
27.04.2023 | Classical Force Fields, Water Models | |
04.05.2023 | Machine learning and Force Fields | |
11.05.2023 | Implicit Water, Coarse-grained Simulations and Soft Matter, part 1 | |
18.05.2023 | Holiday (Christi Himmelfahrt) | |
25.05.2023 | Coarse-grained Simulations and Soft Matter, part 2 | |
01.06.2023 | Holiday week Pfingstferien | |
08.06.2023 | Holiday (Fronleichnam) | |
15.06.2023 | Polyelectrolytes and Poisson-Boltzmann Theory I | |
22.06.2023 | Polyelectrolytes and Poisson-Boltzmann Theory II | |
29.06.2023 | Hydrodynamic Interactions I (Brownian and Langevin Dynamics) | |
06.07.2023 | Hydrodynamic Interactions II (DPD, Lattice-Boltzmann) | |
13.07.2023 | Advanced MC/MD Methods, Free Energy Methods | |
20.07.2023 | Electrostatics and Ewald Summation |
Resources can be found in the respective Ilias folder
Tutorials
Tutorials consist of practical exercises at the computer, like small programming tasks, simulations, visualization and data analysis. The tutorials build on each other, therefore continuous attendance is expected.
Location and Time
- Tutorials take place on Wednesday 15:45-17:15 and Thursday 15:45-17:15 in CIP-Pool 01.033, Allmandring 3.
General Remarks
- For the tutorials, you will get a personal account for the ICP machines.
- For the reports, we have a nice
LaTeX template (7 KB)
.
Hand-in Exercises
- The worksheets are to be solved in groups of two or three people. We will not accept hand-in-exercises that only have a single name on it.
- A written report (between 5 and 10 pages) has to be handed in for each worksheet. We recommend using LaTeX to prepare the report.
- You have two weeks to prepare the report for each worksheet.
- The report has to be sent to your tutor via email (Samuel Tovey or Mariano Brito).
- Each task within the tutorial is assigned a given number of points. Each student should have 50 % of the points from each tutorial as a prerequisite for the oral examination.
What happens in a tutorial
- The tutorials take place every week.
- In the first tutorial after you received a worksheet, the solutions of the previous worksheet will be presented (see below) and the new worksheet will be discussed.
- In the second tutorial after you received the worksheet, there is time to work on the exercises and to ask questions for the tutor.
- You will have to hand in the reports on Monday after the second tutorial.
- In the third tutorial after you received the worksheet, the solutions will be discussed:
- The tutor will ask a team to present their solution.
- The tutor will choose one of the members of the team to present each task.
- This means that each team member should be able to present any task.
- At the end of the term, everybody should have presented at least once.