Simulation Methods in Physics II SS 2022
Please register for this course on CAMPUS, so that every student can get access to ILIAS. The course will be administered through ILIAS. 
Overview
 Type
 Lecture (2 SWS) and Tutorials "Simulationsmethoden in der Praxis" (2 SWS)
 Lecturers
 Prof. Dr. Christian Holm
 Tutorials
 The tutorials have their own title "Simulationsmethoden in der Praxis", as they can be attended independently of the lecture and are in fact part part of the Physics MSc module "Fortgeschrittene Simulationsmethoden" and not of the module containing the lecture "Simulation Methods in Physics II".
 Tutors
 Dr. Azade Yazdanyar, Samuel Tovey and David Beyer
 Location and Time
 Lecture: Lectures are held in the ICP seminar room.
 Tutorials: Thu. 14:00  15:30, and Fri. 11:30  13:00 (Only one session should be attended)
 Course language
 English
Scope
The course intends to give an overview about modern simulation methods used in physics today. The stress of the lecture will be to introduce different approaches to simulate a problem, hence we will not go too to deep into specific details but rather try to cover a broad range of methods. For an idea about the content, look at the lecture schedule.
Prerequisites
We expect the participants to have basic knowledge in classical and statistical mechanics, thermodynamics, electrodynamics, and partial differential equations, as well as knowledge of a programming language. The knowledge of the previous course (Simulation Methods I) is expected.
Certificate Requirements
 1. Obtaining 50% of the possible marks in each of the handin exercises.
The final grade will be determined from the final oral examination.
Oral Examination
Please email Christian Holm in order to arrange a date for the oral examination.
There is an oral examination at the end of the semester. All students having obtained 50% of the points from each tutorial are eligible to take the exam. The duration of the exam depends on the module this lecture is part of. Briefly,
 BSc/MSc Physik, Modul "Simulationsmethoden in der Physik"
 60 min exam (contents from both parts SMI + SMII will be examined)
 International MSc Physics, Elective Module "Simulation Techniques in Physics II" (240918005)
 30 min exam (content only from SMII will be examined).
 BSc/MSc SimTech, Modul "Simulationsmethoden in der Physik für SimTech II"
 40 min (content from SMII will be examined).
For additional information/modules, please contact Christian Holm.
Recommended Literature

Daan Frenkel and Berend Smit.
"Understanding Molecular Simulation".
Academic Press, San Diego, 2002.
[DOI] 
Mike P. Allen and Dominik J. Tildesley.
"Computer Simulation of Liquids".
Oxford Science Publications, Clarendon Press, Oxford, 1987.

Rapaport, D. C..
"The Art of Molecular Dynamics Simulation".
Cambridge University Press, 2004.
[DOI] 
D. P. Landau and K. Binder.
"A guide to Monte Carlo Simulations in Statistical Physics".
Cambridge, 2005.

Michael Rubinstein and Ralph H. Colby.
"Polymer Physics".
Oxford University Press, Oxford, UK, 2003.

M. E. J. Newman and G. T. Barkema.
"Monte Carlo Methods in Statistical Physics".
Oxford University Press, 1999.

Krüger, Timm and Kusumaatmaja, Halim and Kuzmin, Alexandr and Shardt, Orest and Silva, Goncalo and Viggen, Erlend Magnus.
"The Lattice Boltzmann Method: Principles and Practice".
Springer International Publishing, Cham, 2017.
[PDF] (14 MB) [DOI] 
S. Succi.
"The lattice Boltzmann equation for fluid dynamics and beyond".
Oxford University Press, New York, USA, 2001.
[PDF] (13 MB) 
M. E. Tuckermann.
"Statistical Mechanics: Theory and Molecular Simulation".
Oxfor University Press Oxford Graduate Texts, Oxford, 2010.

F. Martin and H. Zipse.
"Charge Distribution in the Water Molecule  A Comparison of Methods".
Journal of Computational Chemistry 26(1)(97–105), 2004.

E. Kaxiras.
"Atomic and electronic structure of solids".
apud Cambridge, Cambridge, 2003.

Andrew Leach.
"Molecular Modelling: Principles and Applications".
apud Pearson Education Ltd., 2001.

Szabo, Attila and Ostlund, Neil S..
"Modern Quantum Chemistry: Introduction to Advanced Electronic Structure Theory".
Dover, 2014.
ISBN13: 9780486691862 ISBN10: 0486691861
Useful Online Resources
 Roethlisberger, Tavernelli, EPFL, Lausanne, 2015: [1]
 EBook: Kieron Burke et al.,University of California, 2007: EBook: The ABC of DFT.
 Linux cheat sheet here (53 KB).
 A good and freely available book about using Linux: Introduction to Linux by M. Garrels
 Densityfunctionaltheory tightbinding (DFTB): Phil. Trans. R. Soc. A, 372(2011), 20120483. [2], Computational Materials Science 47 (2009) 237–253 [3]
 "Ab Initio Molecular Dynamics: Theory and Implementation" in Modern Methods and Algorithms, NIC Series Vol 1. (2000) [4]
 University Intranet: Quantentheorie der Molekuele (DE), Springer Spektrum 2015, [5]
 Be careful when using Wikipedia as a resource. It may contain a lot of useful information, but also a lot of nonsense, because anyone can write it.
Lectures Timetable
The lecture notes will be uploaded in due time after each lecture on the ILIAS course.
Date  Subject  Resources 

14.04.2022  Quantummechanical Methods I  Hartree/HartreeFock/post HartreeFock  
21.04.2022  Quantummechanical Methods II  Density Functional Theory/abinitio MD  
28.04.2022  Classical Force Fields, Water Models  
05.05.2022  Machine learning and Force Fields  
12.05.2022  Implicit Water, Coarsegrained Simulations and Soft Matter, part 1  
19.05.2022  Coarsegrained Simulations and Soft Matter, ML continued  
26.05.2022  Holiday (Christi Himmelfahrt)  
02.06.2022  Polyelectrolytes and PoissonBoltzmann Theory I  
09.06.2022  Holiday week Pfingstferien  
16.06.2022  Holiday (Fronleichnam)  
23.06.2022  Polyelectrolytes and PoissonBoltzmann Theory II  
30.06.2022  Hydrodynamic Interactions I (Brownian and Langevin Dynamics)  
07.07.2022  Hydrodynamic Interactions II (DPD, LatticeBoltzmann)  
14.07.2022  Advanced MC/MD Methods, Free Energy Methods  
21.07.2022  Electrostatics and Ewald Summation 
Resources can be found in the respective Ilias folder
Tutorials
Tutorials consist of practical exercises at the computer, like small programming tasks, simulations, visualization and data analysis. The tutorials build on each other, therefore continuous attendance is expected.
Location and Time
 The time and place of the tutorials will be announced.
General Remarks
 For the tutorials, you will get a personal account for the ICP machines.
 For the reports, we have a nice LaTeX template (7 KB).
Handin Exercises
 The worksheets are to be solved in groups of two or three people. We will not accept handinexercises that only have a single name on it.
 A written report (between 5 and 10 pages) has to be handed in for each worksheet. We recommend using LaTeX to prepare the report.
 You have two weeks to prepare the report for each worksheet.
 The report has to be sent to your tutor via email (Azade Yazdanyar, Samuel Tovey or David Beyer).
 Each task within the tutorial is assigned a given number of points. Each student should have 50 % of the points from each tutorial as a prerequisite for the oral examination.
What happens in a tutorial
 The tutorials take place every week.
 In the first tutorial after you received a worksheet, the solutions of the previous worksheet will be presented (see below) and the new worksheet will be discussed.
 In the second tutorial after you received the worksheet, there is time to work on the exercises and to ask questions for the tutor.
 You will have to hand in the reports on Monday after the second tutorial.
 In the third tutorial after you received the worksheet, the solutions will be discussed:
 The tutor will ask a team to present their solution.
 The tutor will choose one of the members of the team to present each task.
 This means that each team member should be able to present any task.
 At the end of the term, everybody should have presented at least once.